特價

505-686 (505-733)游標卡尺 測定範圍0-200mm 解析度0.01mm Mitutoyo 三豐 儀器

原始價格:NT$5,830。目前價格:NT$4,407。

505-733 三豐游標卡尺 專業代理

三豐編號測定範圍解析度
505-733 (舊型號505-686)200mm0.01mm
貨號: M505-733 分類: , 標籤: , ,

描述

Mitutoyo Digimatic Caliper 505-686 ,Range 0-200mm ,Resolution 0.01mm Dial Caliper 0-200mm

A dial caliper equipped with standard outside and inside jaws. Hardened stainless steel construction with titanium-coated sliding surfaces for low friction/wear.

The Mitutoyo 505-686 Dial Caliper has a measuring range of 0-200mm with 1mm Per One Revolution. Features a newly designed dial movement for ultra smooth sliding and high shock protection. A Titanium Nitride coating has been applied to the sliding surface to increase wear resistance and can measure outside diameter, inside diameter, depth and steps. Equipped with a lock screw for dial bezel as well as for holding the sliding jaw position.

Mitutoyo No.RangeResolution
505-686200mm0.01mm

MITUTOYO三豐游標卡尺 

1.游標卡尺是比較精密的測量工具,要輕拿輕放,不得碰撞或跌落地下。使用時不要用來測量粗糙的物體,以免損壞量爪,不用時應置於乾燥地方防止鏽蝕。

2.測量時,應先擰鬆緊固螺釘,移動游標不能用力過猛。兩量爪與待測物的接觸不宜過緊。不能使被夾緊的物體在量爪內挪動。

3.讀數時,視線應與尺面垂直。如需固定讀數,可用緊固螺釘將游標固定在尺身上,防止滑動。

4.實際測量時,對同一長度應多測幾次,取其平均值來消除偶然誤差

游標卡尺使用完畢,用棉紗擦拭乾凈。長期不用時應將它擦上黃油或機油,兩量爪合攏並擰緊緊固螺釘,放入卡尺盒內蓋好。

參考介紹網頁:

游標卡尺- 台灣Wiki
http://www.twwiki.com/wiki/游標卡尺

額外資訊

顯示類型

測定範圍

解析度

0.01mm

QR Code